Lowrance electronic LMF-200 Marine Instruments User Manual


 
41
2. Select the desired unconfigured fluid level (Unfcg FL
) from the Bus
Devices list and press
MENU, which will launch the following message:
Hit Menu to Cfg FLev Sns.
3. Press
MENU, select WASTE W from the list of fluid types and press
MENU. The Tank Number window will appear.
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you
are configuring and press
MENU. That will launch the Tank Size
window.
5. Input the capacity of the tank (gallons) and press
MENU. You will be
directed to the Bus Devices list, where the fluid level you configured
will be displayed as WtW Tnk1, WtW Tnk2 or WtW Tnk3, depending
on the tank number you assigned it.
To configure EP-15 Fluid Level for Oil:
1. Press
MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES
and press
MENU.
2. Select the desired unconfigured fluid level (Unfcg FL
) from the Bus
Devices list and press
MENU, which will launch the following message:
Hit Menu to Cfg FLev Sns.
3. Press
MENU, select OIL from the list of fluid types and press MENU.
That will launch the Tank Size window.
4. Input the capacity of the tank (gallons) and press
MENU. You will be
directed to the Bus Devices list, where the fluid level you configured
will be displayed as O. Tnk (P), O. Tnk(C) or O Tnk (S), depending the
tank location you chose.
To configure EP-15 Fluid Level for Black Water:
1. Press
MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES
and press
MENU.
2. Select the desired unconfigured fluid level (Unfcg FL
) from the Bus
Devices list and press
MENU, which will launch the following message:
Hit Menu to Cfg FLev Sns.
3. Press
MENU, select BLACK W from the list of fluid types and press
MENU. The Tank Number window will appear.
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you
are configuring and press
MENU. That will launch the Tank Size
window.
5. Input the capacity of the tank (gallons) and press
MENU. You will be
directed to the Bus Devices list, where the fluid level you configured
will be displayed BlkW Tnk1, BlkW Tnk2 or BlkW Tnk3, depending on
the tank number you assigned it.