Filter
Top Products
26
To change Temperature units:
Accessing Temperature from the Change Units menu will allow you to
set the unit of measure for temperature to Fahrenheit or Celsius.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
UNITS and press MENU. Select TEMP and press MENU, which
will launch the Temp menu with two options: Fahrenheit and Celsius.
3. Select the desired setting and press
MENU. You will be taken back to
the main display.
To change Pressure units:
Selecting Pressure from the Change Units menu will allow you to set
the unit of measure for pressure to Imperial/US or SI/Metric.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
UNITS and press MENU. Select PRESSURE and press MENU,
which will open the Pressure menu with two options: Imper (US) and
SI (Metric).
3. Select the desired pressure setting and press
MENU, which will direct
you back to the main display.
To change Depth units:
Choosing Depth from the Change Units menu will allow you to set the
unit of measure for depth to Feet, Fathoms or Meters.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
UNITS and press MENU. Select DEPTH and press MENU, which
will launch the Depth Menu with three options: Feet, Fathoms and
Meters.
3. Select the desired depth setting and press
MENU, which will take you
back to the main display.
To change GPS units:
Selecting GPS Coord from the Change Units menu will allow you to set
the unit of measure for GPS coordinates to Deg/Min or Deg/Min/Sec.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
UNITS and press MENU. Select GPS and press MENU, which
will open the GPS menu with two options: Deg/Min or Deg/Min/Sec.
3. Select the desired GPS unit setting and press
MENU. You will be
directed back to the main display.