Filter
Top Products
42
To configure EP-15 Fluid Level for Live Well:
1. Press
MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES
and press
MENU.
2. Select the desired unconfigured fluid level (Unfcg FL
) from the Bus
Devices list and press
MENU, which will launch the following message:
Hit Menu to Cfg FLev Sns.
3. Press
MENU, select LIVE W from the list of fluid types and press MENU.
The Tank Number window will appear.
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you
are configuring and press
MENU. That will launch the Tank Size
window.
5. Input the capacity of the tank (gallons) and press
MENU. You will be
directed to the Bus Devices list, where the fluid level you configured
will be displayed LW Tnk1, LW Tnk2 or LW Tnk3, depending on the
tank number you assigned it.
To unconfigure EP-15 Fluid Level:
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU. Highlight B. DEVICES and press MENU.
2. Select a configured Fluid Level from the Bus Devices list and press
MENU.
3. Highlight
UNCONFIG (Unconfigure) and press MENU, which will launch
the following message: Hit Menu to Unset Dev Name.
4. Press
MENU and you will be taken back to the Bus Devices list where
the fuel flow you unconfigured will be listed as UnCfg FL.
To reconfigure EP-15 Fluid Level:
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU. Highlight B. DEVICES and press MENU.
2. Select a configured Fluid Level from the Bus Devices list and press
MENU.
3. Highlight
RECONFIG (Reconfigure) from the Configuration Options
menu and press
MENU. That will open the Fluid Type menu. Highlight
the desired fluid type and press
MENU. The Tank Number window will
appear.
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you
are configuring and press
MENU. That will launch the Tank Size
window. You can have up to three tanks for each fluid type.
5. Input the capacity of the tank (gallons) and press
MENU. You will be
directed to the Bus Devices list, where the fluid level you configured
will be displayed with its new configuration.