Filter
Top Products
21
3. To select an item from the bus devices list, use the
UP and DOWN
keys to highlight the device and press
MENU. To get back to the main
display, let the menu time out. Accessing devices from the Bus Devices
list gives you access to an EP sensor's internal menu. We will cover
that in more detail in Section 4: EP Configuration and Calibration.
4. When you are through with the Bus Devices list, let the menu time
out to be taken back to the main display.
Sonar Alarms
Sonar alarms allow you to set alarms that will alert you as water depth
changes around your vessel. If the depth rises above (Deep Alarm) or
falls below (Shallow Alarm) a depth threshold of your choosing, an
alarm will sound.
To set the Shallow Alarm:
The shallow alarm will sound when your vessel enters water more
shallow than the selected shallow alarm threshold.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
SNR ALARMS and press MENU. The Alarm menu will appear
with two choices: Shallow
and Deep.
3. Select
SHALLOW and press MENU. The Shallow Alarm menu will
appear with two options: Off and Set Depth. Select
SET DEPTH and press
MENU. (To turn off the Shallow Alarm, repeat Steps 1-3, then select Off
from the Shallow menu.)
4. Use the
UP and DOWN keys to set the desired depth. Press MENU and
you will be taken back to the main display.
To set the Deep Alarm:
The deep alarm will sound when your vessel enters water deeper than
the selected deep alarm threshold.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
SNR ALARMS and press MENU. The Alarm menu will appear
with two options: Shallow and Deep.
3. Select
DEEP and press MENU, which will open the Deep menu with
two options: Off and Set Depth. (To turn off the Deep Alarm, repeat
Steps 1-3, then select Off from the Deep menu.)
4. Select
SET DEPTH, then use the UP and DOWN keys to set the alarm to
the desired depth and press
MENU. You will be taken back to the main
display.