Filter
Top Products
23
NMEA Info
The NMEA information screen displays information about your NMEA
network, including address, instance, serial number and database
version.
To access the NMEA Information screen:
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
NMEA INFO and press MENU. The menu will time out and
you will be directed to the main display.
System Information
Access the system information screen to see what version of software
you have in your LMF-200.
To access System Information screen:
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
SYS INFO and press MENU. The menu will time out and you
will be taken back to the main display.
Engine Data
The Engine Data feature allows you to select an engine (Port, Center or
Starboard) to be the engine shown on pages that display engine data.
To modify Engine Data:
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
ENG DATA and press MENU. The Engine Data menu will
appear with up to three options: Port, Center and Starboard —
depending on the number of engines you chose during Boat Setup.
3. Select the engine to be displayed (Port, Center or Starboard) and
press
MENU. If, for example, you chose the Port engine, the following
confirmation message would appear: Hit Menu to chg to Port.
4. Press
MENU. You will be taken back to the main display. Pages that
display engine data will now show data from the selected engine.
Engine Warnings
The Engine Warnings feature allows you to set an alarm for one or
more engines. There are up to five options in the Engine Alarms menu,
depending on the number of engines chose during Boat Setup. The
options are All Engines, Port, Center, Starboard and Off. The default
setting is All Engines. (If you have a single-engine configuration, the
only options on the Engine Warning menu will be on and off.)