Filter
Top Products
16
4. Use the
UP and DOWN keys to set the amount of time (between 1-60
seconds) each page will be displayed before the unit scrolls to the next
page. When the desired time has been entered, press
MENU. You will be
taken back to the main display.
Pop-ups Setup
This feature helps you keep tabs on RPM, Engine Trim, Trim Tab and
Rudder pages by launching a pop up window if thresholds for any of the
data types are exceeded. If, for example, you set the RPM threshold to
500 RPM and choose a 10-second Stay Time, the RPM page will pop up
if there is a change in RPM that exceeds 500 RPM — like decreasing
RPM from 2000 RPM to 1300 RPM. The Pop up will expire 10 seconds
after RPM data stops changing. The gauge will revert to the page it
was showing before the threshold was exceeded.
To set a Pop-Up:
1. Press
MENU, use the UP and DOWN keys to select PAGES and press
MENU. Highlight SET POP-UP and press MENU.
2. The Set Pop-up menu will appear with three options: Pages,
Threshold and Stay Time.
3. Select
PAGES and press MENU to open the Pop-up Pages menu with
four options: RPM, Engine Trim, Trim Tabs and Rudder.
4. Highlight the circle to the left of the desired page or pages and press
MENU, which will place an X in the checkbox.
NOTE:
If you select RPM, you will be taken to the Select Engine menu.
Select the desired engine (Port, Center or Starboard) and press
MENU.
5. Let the menu time out and you will be taken back to the main
display.
Stay Time
The Stay Time command allows you to choose how long a pop up will
remain on the screen once the data stops moving. The Stay Time
setting you choose will affect all four Pop-up Pages.
To set Stay Time:
1. Press
MENU, use the UP and DOWN keys to select PAGES and press
MENU. Highlight SET POP-UP and press MENU.
2. The Set Pop-up menu will appear with three options: Pages,
Threshold and Stay Time.
3. Highlight
STAY TIME and press MENU. Use the UP and DOWN keys to
set the amount of time (between 2-15 seconds) pop up windows will
stay on the screen after they are triggered.