Filter
Top Products
20
Key Sounds
When Key Sounds are turned on, a tone will sound every time you push
the
UP, DOWN and MENU keys. When you turn off Key Sounds, no tone
will sound when you depress the keys.
To turn Keys Sounds on or off:
1. Press
MENU, use the UP and DOWN keys to select AUDIO SETUP and
press
MENU. The audio menu will appear with two options: Key Sounds
and Alarm Sounds.
2. Highlight the box to the left of Key Sounds and press MENU to turn
on (check) or turn off (uncheck) key sounds. After choosing the desired
setting, the menu will time out, taking you back to the main display.
Alarm Sounds
When an alarm is set and Alarm Sounds are turned on, you will hear a
tone and see a pop-up window when the alarm is triggered. With an
alarm set and Alarm Sounds turned off, you will see a pop-up window,
but no tone will sound.
To turn Alarm Sounds on or off:
1. Press
MENU, use the UP and DOWN keys to select AUDIO SETUP and
press
MENU. The audio menu will appear with two options: Key Sounds
and Alarm Sounds.
2. To turn Alarm Sounds on or off, select
ALARM SOUNDS from the Audio
Setup menu and press
MENU to turn on (check) or turn off (uncheck)
Alarm Sounds. After choosing the desired setting, the menu will time
out, taking you back to the main display.
System Setup Menu
On each page, the System Setup menu contains: Bus Devices, Snr
Alarms, Timeout, Eng/Tank, Reset, NMEA Info, Sys Info, Eng Data,
Engine Warnings, Units and Fuel Manager. The System Setup menus
for Synchronizer, Engine Trim, Single Analog and Trim Tab pages also
include Speed Range and Pressure Range.
Bus Devices
Bus Devices allows you to manage devices on the NMEA 2000 Network.
Accessing devices from the Bus Devices list gives you access to an EP
sensor's internal menu. We will cover that in more detail in Section 4:
EP Configuration and Calibration.
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
B. DEVICES and press MENU. The Bus Devices list, a list of
network devices, will appear.