Filter
Top Products
5-65
Programming Commands
DISPlay Subsystem
MARKer:MAXimum
Sets the marker to the laser line that has the maximum power.
Syntax
:DISPlay:MARKer:MAXimum
Attribute
Summary
Preset
State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only
MARKer:MAXimum:LEFT
Moves the marker left to the next laser line.
Syntax
:DISPlay:MARKer:MAXimum:LEFT
Attribute
Summary
Preset
State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only
Description
Moves the marker from the current marker position to the next laser line hav-
ing the following characteristic:
• shorter wavelength
• lower frequency
• lower wave number
If the display is in the
List by Ampl
mode, it will be changed to
List by WL
before
the marker is moved.
MARKer:MAXimum:NEXT
Moves the marker to the laser line with the next lower power level.