Filter
Top Products
5-67
Programming Commands
FETCh Measurement Instruction
Description
Moves the marker from the current marker position to the next laser line hav-
ing the following characteristic:
• longer wavelength
• higher frequency
• higher wave number
If the display is in the
List by Ampl
mode, it will be changed to
List by WL
before
the marker is moved.
[WINDow]:GRAPhics:STATe
Turns on and off the display of the power bars.
Syntax
:DISPlay[:WINDow]:GRAPhics:STATe{?| {ON | OFF | 1 | 0}}
Attribute
Summary
Preset
State: on
*RST State: on
SCPI Compliance: standard
Description
Specifying on displays the power bars in all modes except the drift and signal-
to-noise modes. Specifying off prevents the display of power bars for all instru-
ment modes.
FETCh Measurement Instruction
For information on the FETCh measurement instruction, refer to “Measure-
ment Instructions” on page 5-15.