Filter
Top Products
2-13
Using the Multi-Wavelength Meter
Changing the Units and Measurement Rate
Changing the Units and Measurement Rate
This section includes step-by-step instructions for changing the units and
measurement rate.
This section includes:
Displayed units 2-13
Measurement rate 2-14
Continuous or single measurements 2-15
Displayed units
As described below, it’s easy to change the wavelength and amplitude units.
You can choose between the following units:
To change the units of measure
1
Press
Setup
.
2
Press the
MORE
softkey.
3
Press the
UNITS
softkey.
Table 2-1. Available Units
Wavelength Power
nm dBm
cm
–1
mW
THz
µ
W