Filter
Top Products
5-66
Programming Commands
DISPlay Subsystem
Syntax
:DISPlay:MARKer:MAXimum:NEXT
Attribute
Summary
Preset
State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only
Description
If the display is in the
List by WL
mode, it will be changed to
List by Ampl
before
the marker is moved.
MARKer:MAXimum:PREVious
Moves the marker to the laser line that has the next higher power level.
Syntax
:DISPlay:MARKer:MAXimum:PREVious
Attribute
Summary
Preset
State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only
Description
If the display is in the
List by WL
mode, it will be changed to
List by Ampl
before
the marker is moved.
MARKer:MAXimum:RIGHt
Moves the marker right to the next laser line.
Syntax
:DISPlay:MARKer:MAXimum:RIGHt
Attribute
Summary
Preset
State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only