Filter
Top Products
5-78
Programming Commands
STATus Subsystem
PRESet
Presets the enable registers and the PTRansition and NTRansition filters.
Syntax
:STATus:PRESet
Attribute
Summary
Preset
State: none
*RST State: none
SCPI Compliance: standard
Command Only
Description
The PRESet command is defined by SCPI to affect the enable register. If you
want to clear all event registers and queues, use the *CLS command.
Example
OUTPUT 720;”:STATUS:PRESET”
Table 5-7. Preset Values
Status Node Preset Value
Operation enable register 0
Questionable enable register 0
PTRansition filters 32767
NTRansition filters 0