Filter
Top Products
1-8
Getting Started
Step 5. Turn on the Agilent 86120B
Step 5. Turn on the Agilent 86120B
CAUTION
The front panel LINE switch disconnects the mains circuits from the mains
supply after the EMC filters and before other parts of the instrument.
1
Press the front-panel
LINE
key. After approximately 20 seconds, the display
should look similar to the following figure:
The front-panel
LINE
switch disconnects the mains circuits from the mains sup-
ply after the EMC filters and before other parts of the instrument.
2
If the Agilent 86120B fails to turn on properly, consider the following
possibilities:
• Is the line fuse good?
• Does the line socket have power?
• Is it plugged into the proper ac power source?
If the instrument still fails, return it to Agilent Technologies for repair. Refer to
“Returning the Instrument for Service” on page 1-23.