Filter
Top Products
2
inStAlling the optionAl pB-43n ni-Mh BAttery pAck
Note:
The battery pack is not charged at the factory, you must charge
the battery pack before using it with the transceiver.
1
Unlock (open) the safety catch located at the bottom of the
battery pack.
2
Match the guides of the battery pack with the corresponding
grooves on the upper rear of the transceiver, then firmly press
the battery case to lock it in place.
3
Flip the safety catch into place to prevent accidentally pressing
the release latch and removing the battery pack.
4
To remove the battery pack, lift the safety catch, then press the
release latch to unlock the battery pack. Lift the battery pack
away from the transceiver.