Filter
Top Products
36
SCAN
Scan is a useful feature for hands-off monitoring of your favorite
frequencies.
Becoming comfortable with all types of Scan will increase your
operating efficiency.
This transceiver provides the following types of scans:
◆
Band Scan
Scans all frequencies on the current band.
◆
Program Scan
Scans the specified frequency ranges stored in Memory
channels L0/U0 ~ L2/U2.
◆
Memory Scan
Scans all frequencies stored in the Memory channels.
◆
Call Scan
Scans the Call channel as well as the currently selected VFO
frequency or Memory channel.
◆
Priority Scan
Checks the activities on the Priority channel (Pr) every 3
seconds.
Note:
◆
When the CTCSS or DCS function is activated, the transceiver
stops at a busy frequency and decodes the CTCSS tone or DCS
code. If the tone or code matches, the transceiver unmutes.
Otherwise, it resumes scanning.
◆
Press and hold
[MON]
to pause scan in order to monitor the
scanning frequency. Release [MON] to resume scanning.
◆
Pressing
[MENU]
causes scan to stop.
◆
Starting scan switches OFF the Automatic Simplex Check (ASC).
◆
If you press any key other than the following keys during scan, the
transceiver exits scan (excluding Priority Scan). Priority Scan stops
while “PRI” is blinking:
[F]
,
[ ]
,
[ ] (1s)
,
[MON]
,
[UP]
/
[DOWN]
,
Selector,
[F]
then
[MENU]
, and
[F]
then
[MON]
.