Filter
Top Products
31
1
Press
[MR]
to enter Memory Recall Mode.
2
Press
[#]
, then enter the channel number using 2 digits.
• For example, to recall channel 49, press
[#]
,
[4]
,
[9]
.
• You can also enter a memory channel number that is less
than 10 by pressing
[#]
after entering the channel number.
For example, to recall memory channel 9, press
[#]
,
[9]
,
[#]
.
You can also press
[#]
,
[0]
,
[9]
.
Note:
◆
You cannot recall an empty memory channel. An error beep
sounds.
◆
You cannot recall the Program Scan memory channels (L0/U0
~ L2/U2), Priority Channel (Pr) using the numeric keypad.
◆
When you recall an odd-split memory channel, “
” and “ ”
appear on the display. Press
[F]
,
[7]
(Reverse function) {page
24} to display the transmission frequency.
◆
After recalling a memory channel, you may modify data such
as Tone or CTCSS. However, these settings are cleared once
you select another channel or the VFO Mode. To permanently
store the data, overwrite the channel contents {page 28}.
CleariNg a memory ChaNNel
To clear the data from an individual memory channel:
1
Recall the memory channel you want to clear.
2
Press and hold
[ ]
(POWER) to switch the transceiver OFF.
3
Press
[MR]
+
Power ON
.
• A confirmation message appears.
4
Press
[MR]
to clear the channel data.
• The contents of the memory channel are cleared.
• To exit clearing the memory channel, press any key other
than
[ ]
or
[MR]
.