Filter
Top Products
76
Problem Solution
The transceiver switches OFF for
no apparent reason.
The Automatic Power OFF (APO)
function is ON. Access Menu No.
8 (APO) and select your desired
time length or “OFF”.
The transceiver returns to
Reception Mode during a long
transmission.
The transmission time exceeded
the programmed TOT time.
Access Menu No. 12 (TOT) to
select your desired transmission
length. The TOT cannot be turned
OFF, protecting the transceiver
from the thermal damage.
The Scan function does not
resume scanning after the
transceiver detects a signal.
You have selected “SE” (SEEK)
for Menu No. 3 (SCAN). Select
either “TO” (Time-Operated) or
“CO” (Carrier-Operated) for Menu
No. 3 (SCAN).