Filter
Top Products
7
!0
[MON]
Press
[MON
] to turn the Monitor function ON and OFF {page 62}.
Press
[F]
,
[MON]
to enter Squelch Level Adjustment mode {page
11}.
!1
Numeric Keypad
[1]
Press
[F]
,
[1]
to select the Signaling (Tone, CTCSS and DCS)
function {pages 20, 43, 46}.
[2]
Press
[F]
,
[2]
to enter the Tone frequency setup mode {page
21}.
Press
[F]
,
[2] (1s)
to start Tone frequency ID scan {page 22}.
[3]
Press
[F]
,
[3]
to change the Frequency step size {page 58}.
[4]
Press
[F]
,
[4]
to enter the DCS code setup mode {page 46}.
Press
[F]
,
[4] (1s)
to start DCS code ID scan {page 47}.
[5]
Press
[F]
,
[5]
to enter the CTCSS frequency setup mode {page
44}.
Press
[F]
,
[5](1s)
to start CTCSS frequency ID scan {page 44}.
Press
[5](1s)
to turn the Speaker Attenuation function ON and
OFF {page 67}.
[6]
Press
[F]
,
[6]
to turn the Priority Scan ON or OFF {page 41}.
[7]
Press
[F]
,
[7]
to turn the Reverse function ON or OFF {page 24}.
Press
[7] (1s)
to turn the ASC function ON or OFF {page 24}.
[8]
Press
[F]
,
[8]
to select an Offset direction {page 19}.
[9]
Press
[F]
,
[9]
to turn Memory Channel Lockout ON or OFF {page
42}.
[0]
Press
[0] (1.5s)
to turn the Emergency siren ON or OFF {page
65}.
[ ]
Press
[ ]
to illuminate the display {page 58}.
Press
[ ] (1s)
to keep the light ON continuously. {page 58}.
[#]
Press
[#]
to enter the Direct frequency entry mode {page 13}.
Press
[F]
,
[#]
to enter the Volume Adjustment Operation
Selection mode {page 10}.