Filter
Top Products
68
3
Press the
[0]
~
[9]
keys corresponding to the password.
• Power on password will activate when one or more characters
are set.
• Press
[CALL]
to delete an incorrect character.
4
Press
[MENU]
.
• “RE-ENT” appears.
5
Re-enter the same password, for conformation.
• If you enter an incorrect password, an error tone sounds and
return to Menu No.10 (PASSWD).
6
Press
[MENU]
to confirm the password.
7
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
When turning the transceiver power ON while the Password
function is programmed, “PASSWD” appears on the display. You
must enter the password to unlock the transceiver.
To enter the password:
1
Press the
[0]
~
[9]
keys corresponding to the password.
• Press
[CALL]
to delete an incorrect character.
2
Press
[MENU]
to confirm the password.
• If you enter an incorrect password, an error tone sounds and
the transceiver remains locked.