Filter
Top Products
13
direct Frequency entry
In addition to rotating the
Selector
(or pressing
[UP]
/
[DOWN]
),
there is another way to select the frequency. When the desired
frequency is far away from the current frequency, you can directly
enter a frequency using the numeric keypad.
1
Press
[VFO]
.
• You must be in the VFO Mode to make the direct frequency
entry.
2
Press
[#]
.
3
Press the numeric keys (
[0]
to
[9]
) to enter your desired
frequency.
[ ]
allows you to complete the MHz digits entry.
• Pressing
[#]
fills all remaining digits (the digits you did not
enter) with 0 and completes the entry. For example, to
select 145.000 MHz, press
[1]
,
[4]
, and
[5]
, then press
[#]
to
complete the entry.
• If you want to revise the MHz digits only, leaving the kHz
digits as they are, press
[VFO]
in place of
[#]
.
Note:
◆
If the entered frequency does not match the current frequency
step size, the frequency is automatically rounded down to the next
available frequency.
◆
When the desired frequency cannot be entered exactly, confirm the
frequency step size {page 58}.
◆
If you rotate the
Selector
(or press
[UP]
/
[DOWN]
) while entering
the frequency, the transceiver clears the entry.