Filter
Top Products
50
DTMF TX HolD
This function causes the transceiver to remain in Transmission
Mode for 2 seconds after you release each key. So, you can release
[PTT]
while sending the DTMF tones.
1
Enter Menu mode and access Menu No. 21 (DT.H).
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
)
to select “ON”.
3
Press
[MENU]
to store the setting.
4
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
auToMaTic Dialer
If you use the 10 dedicated memory channels to store DTMF codes,
you do not need to remember a long string of digits.
■
Storing a DTMF Code in Memory
1
Enter Menu mode and access Menu No. 19 (DTMF.MR).
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
) to select your desired DTMF memory channel
number from 0 to 9.
3
Press
[MENU]
.
• The DTMF code entry display appears and the last digit
blinks.
4
Rotate the
Selector
(or press
[UP]
/
[DOWN]
) to select a
DTMF code.