Filter
Top Products
65
3
Press
[MENU]
to store the setting.
4
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
• “TX INH” appears and an error beep sounds if the transceiver
tries to transmit while TX Inhibit is ON.
eMergency siren
Press and hold the
[0]
key for at least 1.5 seconds to emit the siren
from the speaker at the selected volume level.
To set the Emergency siren volume level:
1
Enter Menu mode and access Menu No. 11 (EMG).
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
)
to select “OFF”, “VOL”, “MED” or “MAX”.
OFF:
The Emergency siren does not sound.
VOL:
The Emergency siren sounds at the same level as the
current volume setting.
MED:
The Emergency siren sounds using volume level 8, no
matter what the current volume level setting is.
MAX:
The Emergency siren sounds using volume level 31, no
matter what the current volume level setting is.
3
Press
[MENU]
to store the setting.
4
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.