Filter
Top Products
45
• To reverse the scan direction, rotate the
Selector
(or
press
[UP]
/
[DOWN]
).
• When a CTCSS frequency is identified, the identified
frequency appears and blinks.
2
Press
[MENU]
to program the identified frequency in place of
the current CTCSS frequency.
• Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to
exit the Scan function.
Note:
◆
Received signals are monitored through the speaker while
scanning is in progress.
◆
CTCSS Frequency ID Scan does not scan the tone if a signal
is not detected.