Filter
Top Products
35
• The separate transmission frequency is stored in the Call
Channel.
Note:
◆
When you recall an odd-split Call Channel, “
” and “ ” appear on
the display.
◆
Transmit offset status and Reverse status are not stored in an odd-
split Call Channel.
ChaNNel display mode
While in this mode, the transceiver displays only memory channel
numbers (or Memory names if they have been stored) instead of
frequencies.
Press
[PTT]
+
[MR]
+
Power ON
.
• The transceiver displays the memory channel number in place of
the operating frequencies.
To recover normal operation, turn the transceiver OFF and press
[PTT]
+
[MR]
+
Power ON
again.
• The following transceiver keys cannot be used while in Channel
Display mode:
•
[MENU]
/
[VFO]
•
[F]
then
[VFO]
(Memory to VFO transfer)
•
[F]
then
[MR]
(Storing Memory channel)
•
[VFO] (1s)
(Band scan) /
[7] (1s)
(ASC)
•
[PTT]
+
[F]
+
Power ON
(Full reset)
•
[VFO]
+
Power ON
(VFO reset)
•
[MR]
+
Power ON
(Clearing Memory channel)
Note:
◆
To enter the Channel Display Mode, you must have at least one
memory channel that contains the data.
◆
If the memory channel contains the Memory name data, the
Memory name is displayed in place of the “CH” characters.