Filter
Top Products
41
■
Programming a Priority Channel
1
Press
[VFO]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
) to select your desired Priority Channel frequency.
2
Select selective call functions, if necessary.
3
Press
[F]
,
[MR]
.
• The memory channel number appears and blinks.
4
Rotate the
Selector
(or press
[UP]
/
[DOWN]
) to select “Pr”.
5
Press
[MR]
to store the data on the Priority Channel.
■
Using Priority Scan
1
Press
[F]
,
[6]
to turn the Priority Scan ON or OFF.
• The “
” icon appears when the Priority Scan is ON.
Note:
◆
If a signal is received on a Priority Channel with a CTCSS or
DCS code programmed, the Priority Channel is recalled only
when the programmed tone/ code matches.
◆
Press and hold
[MON]
to pause Priority Scan when the
transceiver is not displaying the Priority Channel. Release
[MON]
to resume Priority Scan.
◆
If you clear the Priority Channel, Priority Scan stops.
◆
You can also press any key other than
[ ]
,
[MON]
,
[F]
then
[MON]
(Squelch level adjustment),
[F]
then
[MENU]
(Key lock)
and
[PTT]
to exit Priority Scan while
“
PRI” is blinking.