Filter
Top Products
33
• After storing a Memory name, the Memory name appears
in place of the operating frequency. However, you can still
display the operating frequency, if desired. To display the
frequency rather than Memory name, access Menu No. 6
(MDF) and select “FRQ
”
. This menu toggles the display mode
between the Memory name (“MN
”
) and frequency display
(“FRQ
”
).
7
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
Note:
◆
You cannot name the Call Channel {page 34}.
◆
You cannot assign a Memory name to a channel that does not
contain data.
◆
You can overwrite stored names by repeating steps 2 to 6.
◆
The stored name is erased when you clear the Memory channel
data.
memory -to- Vfo traNsfer
Transferring the contents of a Memory channel or the Call channel
to the VFO can be useful if you want to search for other stations or a
clear frequency, near the selected Memory channel or Call channel
frequency.
1
Press
[MR]
or
[CALL]
to enter Memory Recall mode or select
the Call channel.
2
Rotate the
Selector
(or press
[UP]
/
[DOWN]
) to select your
desired channel. (This step is not necessary when selecting the
Call channel.)
3
Press
[F]
,
[VFO]
.
• The entire contents of the Memory channel or Call channel
are copied to the VFO, and VFO mode is selected after the
transfer is complete.