Filter
Top Products
71
Note:
◆
Record the date of purchase, serial number and dealer from whom
this product was purchased.
◆
For your own information, retain a written record of any
maintenance performed on this product.
◆
When claiming warranty service, please include a photocopy of the
bill of sale or other proof-of-purchase showing the date of sale.
cleanInG
To clean the case of this product, use a neutral detergent (no strong
chemicals) and a damp cloth.
mIcroproceSSor reSet
If your transceiver seems to be malfunctioning, resetting the
microprocessor may solve the problem. The following 2 reset
Modes are available. When performing the reset, you may lose
memory data and stored information. Write down important data
before performing the reset.
VFO Reset
This resets the transceiver parameters excluding the stored DTMF
Numbers in Memory {page 50} and memory channel contents.
Full Reset
This resets all transceiver parameters to the factory default values.
Note:
While operating the transceiver in Channel Display Mode {page
35}, you cannot reset the transceiver.
■
VFO Reset
When the transceiver is turned OFF:
1
Press
[VFO]
+
Power ON
.
• The VFO reset confirmation message, “VF.RST?”
appears.