Filter
Top Products
64
Note:
◆
You cannot program the 100 kHz or lower digits.
◆
The upper limit frequency cannot be set lower than the selected
lower limit frequency.
TiMe-ouT TiMer
The Time-out Timer limits the time of each transmission. The built-
in Time-out Timer limits each transmission time to a maximum of
3, 5 or 10 (default) minutes. Just before the transceiver stops the
transmission, a warning beep sounds. This function is necessary to
protect the transceiver from thermal damage and can therefore not
be turned OFF.
1
Enter Menu mode and access Menu No. 12 (TOT).
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
)
to select “3”, “5” or “10”.
3
Press
[MENU]
to store the setting.
4
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
Note:
A warning beep sounds even if you set Menu No. 16 (BP) to
OFF.
TX inHiBiT
You can inhibit the transmission to prevent unauthorized individuals
from transmitting, or to eliminate accidental transmissions while
carrying the transceiver.
1
Enter Menu mode and access Menu No. 14 (TXI).
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
)
to select “ON”.