Filter
Top Products
9
Indicator Description
Appears when the Key Lock function is ON
{page 59}
.
Appears when the Offset direction is set to
plus {page 19}.
Appears when the Offset direction is set to
minus {page 19}.
Appears while using Low output power {page
14}.
Appears when the Reverse function is ON
{page 24}.
Appears when the ASC function is ON. Blinks
when the ASC function is performing an OK
check {page 24}.
Appears when the [F] key is pressed.
Note:
While the Battery Saver is operating {page 55}, the “ ”
indicator may flash when receiving a CTCSS/DCS signal which does
not match the CTCSS/DCS tone/code set up in your transceiver.