Filter
Top Products
10
Switching the power on/oFF
1
Press
[ ]
(POWER) to switch the transceiver ON.
• The power on message momentarily appears on the display.
• If the transceiver power on password has been activated
{page 67}, you must first enter your password before you can
operate the transceiver.
2
To switch the transceiver OFF, press
[ ]
(POWER) again.
AdjuSting the VoluMe
Press
[UP]
to increase the audio output level and press
[DOWN]
to
decrease the output level.
• If you are not receiving a signal, press and hold
[MON]
to
unmute the speaker, then adjust the volume control to a
comfortable audio output level.
VoluMe AdjuStMent operAtion Selection
With the setting described below, you can adjust the volume using
either the
[UP]
/
[DOWN]
keys or by operating the
Selector
.
1
Press
[F]
,
[#]
.
• The selected display appears.
BASIC OPERATION