Filter
Top Products
27
◆
If you change the memory channel capacity from 50 channels to
100 channels after storing Memory names in those channels, all
Memory name data will be erased.
simplex & repeater or odd-split memory ChaNNel?
You can use each memory channel as a simplex & repeater
channel or as an odd-split channel. Store only one frequency to use
as a simplex & repeater channel or two separate frequencies to use
as an odd-split channel. Select either application for each channel
depending on the operations you have in mind.
Simplex & repeater channels allow:
• Simplex frequency operation
• Repeater operation with a standard offset (if an offset direction is
stored)
Odd-split channels allow:
• Repeater operation with a non-standard offset.
The data listed below can be stored in each Memory channel:
Parameter Simplex & Repeater Odd-split
Receive frequency
Yes
Yes
Transmit frequency Yes
Tone ON Yes Yes
Tone frequency Yes Yes
CTCSS ON Yes Yes
CTCSS frequency Yes Yes
DCS ON Yes Yes
DCS code Yes Yes
Offset direction Yes No
Offset frequency Yes No
Reverse ON Yes Yes
Frequency step size Yes Yes
Beat Shift Yes Yes
Memory channel lockout Yes Yes
Memory channel name Yes Yes