Kenwood TH-255A Marine Radio User Manual


 
47
Available DCS Code
023 025 026 031 032 036 043 047
051 053 054 065 071 072 073 074
114 115 116 122 125 131 132 134
143 145 152 155 156 162 165 172
174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265
266 271 274 306 311 315 325 331
332 343 346 351 356 364 365 371
411 412 413 423 431 432 445 446
452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606
612 624 627 631 632 654 662 664
703 712 723 731 732 734 743 754
DCS Code ID Scan
This function scans through all DCS codes to identify the
incoming DCS code on the received signal. You may find this
useful when you cannot recall the DCS code that the other
persons in your group are using.
1
Press
[F]
,
[4] (1s)
to start the DCS code ID scan.
While scanning, the decimal point between “DCS” and the
DCS code blinks.
To reverse the scan direction, rotate the
Selector
(or
press
[UP]
/
[DOWN]
).
When a DCS code is identified, the identified DCS code
appears and blinks.