Filter
Top Products
6
q
[PTT]
Press and hold
[PTT]
to transmit.
Press
[F]
,
[PTT]
to toggle the transmit output power between High
and Low {page 14}.
w
[MENU]
Press
[MEMU]
to enter Menu mode {page 15}.
Press
[F]
,
[MEMU]
to turn the transceiver key lock function ON or
OFF {page 59}
e
[UP]( )/ [DOWN]( )
Press
[UP]
/
[DOWN]
to adjust the Volume Level {page 10}.
r
Selector
Rotate the Selector to select an operating frequency or Memory
channel, change the scan direction, select a Menu, etc.
t
[CALL]
Press
[CALL]
to select the Call channel {page 34}.
Press
[CALL] (1s)
to start Call scan {page 40}.
Press
[F]
,
[CALL]
to store the current operating frequency to the
Call channel {page 34}.
y
[ ]
Press
[ ]
(POWER) to turn the transceiver power ON and OFF.
u
[F]
Press
[F]
to enter MHz mode {page 12}.
i
[VFO]
Press
[VFO]
to enter VFO mode {page 12}.
Press
[VFO] (1s)
to start Band scan {page 37}.
Press
[F],
[VFO]
to copy the current Memory channel or Call
channel to the VFO (memory shift) {page 33}.
o
[MR]
Press
[MR]
to enter Memory Channel mode {page 30}.
Press
[MR] (1s)
to start Memory scan {page 39}.
Press
[F]
,
[MR]
to store the current operating frequency in the
Memory channel {page 28}.