Filter
Top Products
56
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
)
to select the receiver shutoff period from OFF, 0.2, 0.4, 0.6, 0.8,
1.0, 2.0, 3.0, 4.0, or 5.0 seconds.
3
Press
[MENU]
to store the setting.
4
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
Note:
◆
The longer the shut-off period, the more you can save on battery
consumption. However, there is a greater chance of missing a
signal.
◆
When the CTCSS/ DCS code matches during reception, the battery
saver function is turned OFF.
◆
Battery Saver does not function while scanning.
BeaT sHiFT
Since the transceiver uses a microprocessor to control various
functions of the transceiver, the CPU clock oscillator’s harmonics or
image may appear on some spots of the reception frequencies {page
73}. In this case, turn the Beat Shift function ON.
1
Enter Menu mode and access Menu No. 17 (BS).
2
Press
[MENU]
, then rotate the
Selector
(or press
[UP]
/
[DOWN]
)
to select “ON”.
3
Press
[MENU]
to store the setting.
4
Press any key other than
[MON]
,
[UP]
/
[DOWN]
or
[ ]
to exit
Menu mode.
Note:
Beat Shift status can be stored to each Memory channel.