Filter
Top Products
62
MoniTor
When you are receiving while the squelch function is ON, weak
signals may become intermittent. If the CTCSS or DCS function
is ON, you may want to disable the squelch function temporarily to
monitor the current channel activities. In both of these cases, use
the Monitor function to temporarily disable the squelch function.
To activate the Monitor function:
1
Press and hold
[MON]
.
• The speaker is unmuted and you can monitor the signals.
2
Release
[MON]
to return to normal operation.
power on Message
You can change the Power ON Message (a maximum of 6
characters) when the transceiver is turned ON.
1
Enter Menu mode and access Menu No. 15 (P.ON.MSG).
2
Press
[MENU]
.
• A blinking cursor appears.
3
Rotate the
Selector
(or press
[UP]
/
[DOWN]
) to select a
character.
• You can enter the following alphanumeric characters:
0 ~ 9, A ~ Z, - (hyphen), / (slash) and a space.
4
Press
[MENU]
.
• The cursor moves to the next digit.
5
Repeat steps 3 and 4 to enter up to 6 digits.