Filter
Top Products
29
4
Press
[PTT]
+
[MR]
.
• The transmission frequency is stored in the memory channel.
Note:
When you recall an odd-split memory channel, “ ” and “ ”
appear on the display. To confirm the transmission frequency, press
[F]
,
[7]
(Reverse function).
CoNtiNuously storiNg iN simplex or split ChaNNels
Using the following procedure will be easier to sequentially store
frequencies and related data in more than one simplex or split
memory channel.
1
Press
[PTT]
+
[MON]
+
Power ON
to enter Memory Storage
mode.
2
Press
[ ]
, then rotate the
Selector
(or press
[UP
]/
[DOWN]
) to
select the desired frequency and select related data as required
(Tone, CTCSS, DTSS, etc.).
• Pressing
[ ]
toggles frequency select (the MHz dot blinks) or
channel select (the channel number blinks).
3
Press
[ ]
again, then rotate the
Selector
(or press
[UP
]/
[DOWN]
) to select the desired memory channel.
4
Press
[MR]
.
• The selected frequency and related data are stored in
the memory channel, and the memory channel number is
incremented.
5
Turn the transceiver power OFF, then ON to exit Memory
Storage mode.