Filter
Top Products
2. DIRECT DRIVE MOTOR
2 - 13
(d) D/MS3106B14S-2S
D/MS3106B18-10S
D/MS3106B22-22S
D/MS3106B32-17S
[Unit: mm]
L or less
W
A
V
Y or less
J 0.12
Q
Model name A J L Q V W Y
Connector
configuration
(Note)
D/MS3106B14S-2S 7/8-20UNEF 13.49 42.88 28.57 3/4-20UNEF 8.00 30 B
D/MS3106B18-10S 1 1/8-18UNEF 18.26 52.37 34.13 1-20UNEF 9.53 42 C
D/MS3106B22-22S 1 3/8-18UNEF 18.26 56.57 40.48 1 3/16-18UNEF 9.53 50 D
D/MS3106B32-17S 2-18UNS 18.26 61.92 56.33 1 3/4-18UNS 11.13 66 E
Note. For the connector configuration, refer to section 2.4.2.
(e) D/MS3057-6A
D/MS3057-10A
D/MS3057-12A
D/MS3057-20A
[Unit: mm]
Effective thread length C
1.6
D (Cable clamp inner diameter)
V
E (Bushing inner diameter)
A 0.7
B 0.7
G 0.7
Model name Shell size A B C D E G V Bushing
Connector
configuration
(Note)
D/MS3057-6A 14S 22.2 24.6 10.3 11.2 7.9 27.0 3/4-20UNEF AN3420-6 B
D/MS3057-10A 18 23.8 30.1 10.3 15.9 14.3 31.7 1-20UNEF AN3420-10 C
D/MS3057-12A 22 23.8 35.0 10.3 19.0 15.9 37.3 1 3/16-18UNEF-2A AN3420-12 D
D/MS3057-20A 32 27.8 51.6 11.9 31.7 23.8 51.6 1 3/4-18UNS AN3420-20 E
Note. For the connector configuration, refer to section 2.4.2.