Filter
Top Products
Using the Panaboard in Projector Mode
35
Using
■ Switching the Mode
You can freely switch the Projector mode and the
Whiteboard mode while the Interactive Panaboard
Software is running.
1 Right-click the icon in the Taskbar and
click Select Mode... in the pop-up menu. In
addition, you can double-click the icon in the
Taskbar.
•The Select Mode window appears.
2 Click Projector or Whiteboard icon, and then
click [OK].
Note
•When switching to the Projector mode, the
calibration screen will not be displayed
automatically after calibration ended
correctly once. Calibrate if necessary.
•When switching to the Whiteboard mode, the
Whiteboard window will be displayed.
■ Setting the Communication Port
Specifies the communication port to communicate
with the Interactive Panaboard.
1 Right-click the icon in the Taskbar and
click Settings - Communication Port... in the
pop-up menu.
•The Communication Port window appears.
2 Click [Start...] of the Auto Detection to detect
the communication port connected with the
Interactive Panaboard automatically.
3 Click [OK].
Note
•The COM Port can be selected for older
models of the Interactive Panaboard without
USB port.