Filter
Top Products
Using the View Window or Whiteboard Window
71
Using
- Make the current page empty after copy
page is added:
With check mark (default setting):
The selected page of the IPB document is
copied and the selecting page is
automatically erased as a new page (blank
page) by pressing the (Copy Key).
When selecting this option, be sure to wipe
to clear the Interactive Panaboard screen
after pressing the (Copy Key).
Without check mark
:
The selected page of the IPB document is
copied by pressing the (Copy Key)
and the page is left as is.
- Do not output copy page from
Panaboard printer when Copy Key is
pressed.:
With check mark
:
The selected page of the IPB document is
not printed when the (Copy Key) is
pressed.
Without check mark (default setting)
:
The selected page of the IPB document is
printed when the (Copy Key) is
pressed.
•No response:
An IPB document it not influenced even if the
(Advance Key) on the Interactive
Panaboard is pressed.
3 Click [OK].
Note
•The computer screen will be projected onto
the screen of the Interactive Panaboard in
Projector mode and because there is no
physical size, the display unit system is only
in pixels (dots) and cannot be changed.
•The length unit millimeter or inch is used as
unit to represent the page size on the status
bar, pen width and eraser size.