Filter
Top Products
Using the Panasonic-DMS
72
You can scan images on the screen to your computer
by operating Panasonic-DMS.
1 Click [Start], move the pointer to Programs–
Panasonic–Panasonic Document
Management System–Document Manager.
(For Windows XP, All Programs instead of
Programs.)
•The Panasonic-DMS software runs.
2 Click the File menu, then click Select
Source....
3 Select Panaboard UB-8 USB TWAIN Driver
and click [Select].
4 Click the File menu, then click Acquire
Image..., or click the (scanner) icon on the
Toolbar.
•The Panaboard Operation Panel appears.
Note
•If the Panasonic Interactive Software is
started, the Panaboard Operation Panel
cannot be displayed. Close the Panasonic
Interactive Software and start it.
•When the Panaboard Operation Panel is not
displayed, check the USB cable connection
or the condition of the electronic board.
5 Click the (Scan) button or the
(2-Screen Scan) button.
•Scanning starts and the scanned image will
be displayed on the screen of the computer.
It is also possible to start scanning using the
(Copy Key) or (2-Screen Copy
Key) on the electronic board.
6 Click [Close] on the Panaboard Operation
Panel to finish scanning.
•About the Document Manager, refer to the
Document Management System operating
instructions in the CD-ROM.
Note
• Dragging the Panaboard Operation Panel using
the mouse or activating other software programs
during scanning may cause scanning troubles.
Using the Panasonic-DMS
Scanning