Filter
Top Products
84
For Your Safety
To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.
The following graphic symbols are used in this
Installation Manual.
Safety check must be done by qualified
service personnel after installing this option.
Be sure to disconnect the power cord while
installing the unit. Otherwise, it may cause
electric shock or injury.
Be sure to use the specified parts for the
installation. Otherwise, it may cause fire,
electric shock or injury.
Notes in the operating instructions or notes
of labels on the cabinet, chassis or parts
should be observed.
Do not install the unit except by a qualified
service personnel.
After installing or moving the electronic
board, lock the casters and set the fall-
prevention extension legs.
If the unit is hung on a wall, confirm the wall
must be capable of supporting at least the
following weight.
1,005 N [103 kgf (227 lbs.)]
Do not attach the electronic board to
mortared walls. Accidental electric leakage
from the wall-mounting fixture bolts to metal
laths or wire laths can cause heat, smoke or
a fire.
Confirm the bolts of the unit are certainly
caught by the wall-mounting fixtures by
pulling the unit after hanging the unit on the
wall-mounting fixtures if the unit is mounted
on a wall.
Be sure to put on a glove to avoid electric
shock or injury.
Denotes a potential
hazard that could
result in serious
injury or death.
Denotes hazards
that could result in
minor injury or
damage to the unit.
This symbol is used to alert
operators to a specific operating
procedure that must not be
performed.
These symbols are used to alert
operators to a specific operating
procedure that must be emphasized
in order to operate the unit safely.
Notice
WARNING
CAUTION
WARNING
CAUTION
L
ocking the casters
(
Push this side)
Push to lock