Filter
Top Products
Using the Panaboard in Projector Mode
41
Using
Note
•When the Desktop Drawing Tool is closed,
the drawings are erased.
• (Next) and (Previous) are only
displayed when the PowerPoint Slide Show
is running.
■ Drawing or Erasing Lines
For the instructions, refer to “Step 2: Drawing and
erasing lines on the Desktop” on page 38.
Note
•
The width, color of the markers and the size
of the eraser can be changed. (See page 41.)
•Handwritten lines drawn on the Desktop may
be hidden or shifted when an application or a
window is operated. If this occurs, click
(Refresh) to display the Desktop.
■ Refreshing Drawings on the
Desktop
Drawings on the Desktop may be hidden or shifted
when an application or a window is operated. If this
occurs, refresh the Desktop.
1 Click (Refresh) in the Desktop Drawing
Tool.
■ Erasing All Drawings on the
Desktop
1 Click (All Clear) in the Desktop Drawing
Tool.
•A verification window appears.
2 Click [OK] to clear all.
■ Changing Marker / Eraser
Settings
It enables to change the width, color of the markers
and the size of the eraser used in the Desktop
Drawing Tool. These settings are effective until being
changed.
1 Click (Setting) in the Desktop Drawing
Tool.
•The Marker / Eraser Setting window
appears.
2 Change the width or color of markers, or size
of the eraser.
•Same Width:
Width of all color markers can be set to the
same width of the black marker by checking
the check box.
•Black / Red / Blue / Green:
Width (1 - 30 dots) or color of each marker
can be set.
To change the width,
- Type the number of width.
- Click the right or left arrow of the scroll bar.
- Drag the scroll bar to the right or left.
To change the color,
Click the color of marker. Click the desired
color from the Basic colors palette in the
Color window.