Filter
Top Products
11
3 Installing and Configuring
Opening and Closing the HP Server tc3100
This section describes how to open and close the front bezel, lower bezel, and side panel of the HP Server
tc3100.
WARNING Before opening the server, always disconnect the power cord and unplug cables.
Disconnect the power cord to avoid exposure to high energy levels that may cause burns
when parts are short-circuited by metal objects such as tools or jewelry. Disconnect
telephone cables to avoid exposure to shock hazard from telephone ringing voltages.
Wear a wrist strap and use a static-dissipating work surface connected to the chassis
when handling components. Ensure the metal of the wrist strap contacts your skin.
Figure 3-1 shows the HP Server tc3100 with SCSI cold swap hard drives. The tc3100 is also available with
SCSI hot swap hard drives.
· The key lock, power button, and system and LAN status indicators are located within the front upper
bezel. See Figure 3-2.
· The SCSI hard drives are accessible from the front lower bezel. See Figure 3-3.
· The system board modules, power supply, fan assembly, and PCI cards are accessible from the side
panel. See Figure 3-4.
Figure 3-1. HP Server tc3100 Enclosure