HP (Hewlett-Packard) tc3100 Life Jacket User Manual


 
Chapter 3 Installing and Configuring
29
Figure 3-17. Removing the Terminator
8. Lift the terminator out of the socket and place it on an anti-static surface or in a container.
NOTE Keep the terminator for future use. The terminator must be installed in the secondary
processor socket when only one processor is used or the HP Server will not operate
properly.
9. Align the second processor over the empty processor socket. See Figure 3-18.
CAUTION Ensure you align pin-1 of the processor with pin-1 of the processor socket or pin damage
will occur.
10. Insert the second processor into the socket and close the ZIF lever to fully seat the processor.
You should hear the ZIF lever click when it closes properly.
Figure 3-18. Installing Processor