Filter
Top Products
Chapter 3 Installing and Configuring
35
Figure 3-21. Accessory Slots
NOTE Refer to the Readme file, Tested Products List, or Configuration Advisor on your HP
Server Navigator CD-ROM for specific slot recommendations for a particular PCI board
type.
8. Push the PCI slot cover from the rear of the chassis and slide it towards you to remove it. See Figure
3-22.
NOTE Ensure you save the slot covers for use later to prevent EMI interference.
Figure 3-22. Removing Slot Cover
9. If you are installing a long accessory board, open the PCI card guide retainer.
10. Align the new board carefully, slide it into position, and press it firmly into the connector.