Filter
Top Products
13
Installation and Removal of FR-PU07
•For FR-D700
(1) Remove the inverter front cover. (For the removal of the front cover, refer to the inverter
manual.)
(2) Securely insert one end of connection cable into the PU connector of the inverter and the
other end into the connection connector of FR-PU07 along the guides until the stoppers
are fixed.
1.3.4 Removal when the connection cable (FR-CB2) is used
Hold down the tab (stopper) at the cable end and gently pull the plug.
CAUTION
Do not connect the connection cable when the front cover is removed.
REMARKS
For details of the connection cable (FR-CB2), refer to the connection cable (FR-CB2) instruction manual.
STF FWD PU
Stoppe
r
FR-PU07
PU connector
Stopper
Connection cable