Filter
Top Products
31
Frequency Setting
2
2.2.2 Step setting
Change frequency continuously using / .
You can change the frequency only while you press / . Since the frequency changes slowly at first, this setting
can be used for fine adjustment.
1
Press .
The frequency setting screen
appears.
2
Press / to enter
a desired value (60.00Hz).
You can set any value
between the maximum
frequency (Pr. 1 ) and
minimum frequency (Pr. 2 ).
3
Press .
The 60Hz setting is complete.
Freq Set
SET 0.00Hz
0~400Hz
Freq Set
SET 0.00Hz
60.00Hz
0~400Hz
60.00Hz
60.00Hz
Freq Set
SET
Completed
REMARKS
Change of frequency can be made during operation by
the step setting. However, pressing / at
monitor mode may cause actual set frequency to be
higher/lower from the indicated frequency on the
monitor. When performing the step setting at monitor
mode, make sure that output frequency is following the
set frequency.