Filter
Top Products
17
Connection and Removal of FR-PU07BB
1.4.2 Instructions for the FR-PU07BB (battery mode)
(1) Functions available when using in the battery mode
(2) FM/AM calibration parameter (Pr.900, Pr.901) cannot be set (calibrated).
(3) For following calibration parameters, only the adjusting method without application of analog voltage
(current) is available.
(4) Operation by the FR-E700 series operation panel is invalid.
Only PRM LED of the operation panel lit at this time.
(5) Do not use the FR Configurator. FR Configurator may not function properly.
Description Remarks
Parameter
change
· Parameter read
· Parameter write
· Parameter read/write for plug-in option can be
done in battery mode independently of whether
the plug-in option is mounted or not.
Functions of
the function
menu
· For monitor, only frequency setting monitor is available
· PU Operation (Only switching between PU/PU Jog
modes is available, not operational)
· Parameter (list, initial value, changed value, read)
· Parameter clear
· Read/clear of the faults history
· Inverter reset
· Troubleshooting
· Read of software version
· Output terminal monitor
· Frequency direct setting
· Copy/verification function
· Monitor value other than frequency setting
monitor is always "0".
· The ON/OFF status of the input signal for the
terminal assignment monitor cannot be
displayed.
· Option fitting status monitor cannot be
displayed.
FR-A700 FR-F700 FR-E700
Pr. 902 to Pr. 905, Pr. 917 to Pr.
920, Pr. 932, Pr. 933
Pr. 902 to Pr. 905 Pr. 902 to Pr. 905, Pr. 922, Pr. 923