Filter
Top Products
60
Operation Procedures for Functions
3.2.2 Selection of PU operation (direct input)
You can select the PU operation mode to set PU operation frequency.
1
Press .
The function menu is called.
2
Using , move the cursor
to "2 PU Oper".
3
Press .
The menu on the right
appears.
4
Make sure that the cursor
is located at "1 PU:
Directly".
If not, move the cursor with
/ .
5
Press .
The PU operation mode is
selected and the frequency
setting screen appears.
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
2 JOG:Jogging
1 PU:Directly
SET 0.00Hz
Freq Set
0~400Hz
6
Enter the set frequency
using to and press
.
The frequency setting is
complete.
7
Press / to perform
forward or reverse rotation
with the set frequency.
REMARKS
· Press to call the frequency setting screen any
time.
SET 60.00Hz
60.00Hz
Freq Set
Completed
60.00Hz
STF FWD PU
READ
:
List