Filter
Top Products
59
Operation Procedures for Functions
3
3.2 Operation Procedures for Functions
3.2.1 Monitor function
The monitoring list appears and you can change from one monitor screen to another and set the first
priority screen.
1
Press .
The function menu is called.
2
Make sure that the
cursor is located at "1
MONITOR".
If not, move the cursor with
/ .
3
Press .
The monitoring list is called.
4
Press or to
move the cursor to the
desired item.
Hold down and press
/ to shift one screen.
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
2 Current
3 Voltage
1 Frequency
4 Alarm His
2 Current
3 Voltage
1 Frequency
4 Alarm His
5
Press .
The monitor screen selected
by the cursor appears.
Press to give the first
priority to this monitor screen.
REMARKS
· The monitoring list can be called only with pressing
in the monitoring mode. (Refer to page 27)
· "4 Alarm His" can not be set to the first priority
monitor.
· When FR-PU07BB is used in the battery mode (the
inverter power is OFF), only frequency setting
monitor is available. (The monitor value other than
frequency setting monitor is always "0".)
· Some monitoring items are not displayed depending
on the connected inverter. To check the available
monitoring items, refer to the setting range of Pr.52
DU/PU main display data selection of the inverter.
0.00A
--- STOP PU
READ
:
List